How to choose the right jack? Floor jacks or transmission jacks?
In the realm of vehicle lifting, there exists a multitude of choices, among which transmission jacks stand out. These helpful tools aid in the lifting and lowering of transmissions and transfer cases. However, one might ponder their worthiness and indispensability, particularly when operating an auto repair shop. Consequently, this blog post will elucidate the significance of transmission jacks, delving into their distinctions and recommending the most suitable options for your specific requirements.
What is the purpose of a transmission jack?
not just a convenience, but a necessary safety measure. Lifting a transmission by hand or using a regular floor jack can lead to accidents and vehicle damage. Transmission jacks can weigh anywhere from 150 to 800 pounds, depending on the vehicle’s size.
Attempting to balance a heavy load on a floor jack or makeshift support increases the risk of the transmission slipping or falling, potentially causing severe injuries. This is why utilizing transmission jacks is vital for ensuring safety at your auto shop.
These jacks are specifically designed to securely hold and support the transmission during removal or installation. They have a wide base that promotes stability and a saddle equipped with adjustable brackets or chains to accommodate various transmission sizes and shapes.
Furthermore, some transmission jacks incorporate hydraulic or pneumatic mechanisms that make raising and lowering the load effortless and precise.
Which kinds of transmission jacks exist?
There are two main categories of transmission jacks: transmission stands and heavy-duty transmission jacks. Transmission stands are smaller and lighter compared to heavy-duty transmission jacks. They are primarily used for vehicles with low ground clearance, such as cars and light trucks. Due to their compact size and low profile, they can fit underneath these types of vehicles. However, their lifting capacity is limited, typically ranging from 500 to 1,500 pounds.
In contrast, heavy-duty transmission jacks are larger and heavier. They are designed to handle high-profile vehicles like buses, trucks, and tractors. These jacks require more space under the vehicle to operate due to their lower height. Additionally, heavy-duty transmission jacks have a higher lifting capacity, usually ranging from 2,000 to 4,000 pounds.
Transmission jacks can also be classified based on their lifting range. Some models are designed with a low-rise feature, meaning they can only lift loads to a specific height.
There are two main categories of transmission jacks: transmission stands and heavy-duty transmission jacks. Transmission stands are compact and lightweight, primarily used for low-profile vehicles like cars and light trucks. They have a low height, making them suitable for vehicles with minimal ground clearance. These jacks typically have a lifting capacity ranging from 500 to 1,500 pounds.
On the other hand, heavy-duty transmission jacks are larger and heavier, designed for high-profile vehicles such as buses, trucks, and tractors. They also have a lower height, but require more space underneath the vehicle for operation. Heavy-duty transmission jacks have a significantly higher lifting capacity, usually between 2,000 and 4,000 pounds.
Transmission jacks can also be categorized based on their lifting range. There are models with a low-rise design that can only lift the load up to a specific height.
Which are the best floor jacks?
The best floor jacks for your auto shop depend on several factors. Actually, consider the type and size of the vehicle you work on, the space available in your shop, your budget, and your personal preference.
But, based on our sales experience, we recommend the following four models as some of the best floor jacks on the market:
JA-JF01 Floor Jack Heavy Duty Low Rider,3-Ton Capacity
This is a low-rise floor stand that can lift up to 6,600 pounds. It has a small height of 75 mm and a large height of 500 mm. The JA-JF01 garage floor jack can get under most low-profile cars and sports cars with a frame that is low to the ground. It features a low saddle height for a 3-ton hydraulic jack and also sports a quick pump feature that allows you to quickly raise the saddle to get that car up swiftly, so your technician isn’t wasting time pumping when he should be servicing the vehicle. It is constructed of heavy duty steel and has a safety overload valve to prevent overloading the jack. This model was made for those situations when the smaller 2-ton or 1.5-ton low-profile jacks just aren’t enough for the job.
JA-JF03 Floor Jack Heavy Duty Low Rider 3Ton Capacity
This is a low-rise floor stand that can lift up to 6,600 pounds. It has a small height of 135 mm and a large height of 495 mm. A low start height combined with a high lift height accommodates a variety of vehicles. Heavy-duty steel frame design stands up to the most vigorous shop use. Manual pump feature included. Large front wheels and long-life heavy-duty rear swivel casters allow ease of portability and durability.
Do not hesitate to reach out to us if you require assistance in selecting the finest equipment for your shop. Our team of experts will gladly assist you with all your needs.
